Loctite

LOCTITE® Industrial Power Grab® is a premium quality, high strength, gap-filling adhesive for both indoor and outdoor projects. It has an extremely high tack, which eliminates the need for nails and screws in many repair jobs. The adhesive is weather resistant, paintable, has a very low odour, and requires only soap and water to clean up making the product safe, easy to use and environmentally friendly. Typical applications include bonding wood, plywood, pressure-treated lumber, aluminum, cork, foam board, ceramics, plaster, brick, concrete, chip board, PVC (rigid plastic), polystyrene and polyurethane foam covings. Ideal for bonding of wood decking to joists, fencing and siding.

LOCTITE® LB 8014 is a white, metal-free, food grade lubricant and anti-seize made from white oil and extreme pressure (EP) additives. It prevents friction, seizing and galling in stainless steel and other metal parts. It is temperature resistant to +400°C, has a 0 NLGI grade and is H1 NSF Registered; No: 123004.

LOCTITE® LB 8150 is anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives. It is a silver, aluminum, petroleum-based lubricant and is inert and won't evaporate or harden in extreme heat or cold. It can tolerate high temperatures to +900°C and is suitable for assemblies where such temperatures are possible.

LOCTITE® EA 9017 (known as FIXMASTER® FAST CURE POXY PAK™ EPOXY) is a 2-part, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics. This product can withstand temperatures up to +300°F (+149°C).

LOCTITE® EA 0151 is a general purpose, ultra clear, thixotropic, epoxy paste adhesive for bonding glass, metals, circuit boards, fibre optics, and many plastics. It is easy to mix, and its 50-minute work-life allows for extended adjustment time. Cure is room temperature or heat.

LOCTITE® UK U-05FL is an off-white, 2-part, medium-viscosity, industrial grade, polyisocyanate urethane adhesive. It cures at room temperature to form a highly flexible bond line, providing excellent peel and shear strength. Ideal for bonding a variety of metals, plastics, glass, wood and more, it can also be used for potting and encapsulating strain and heat sensitive electronic components.

LOCTITE® EA E-90FL is a grey, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, grey bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

LOCTITE® 411 is a water white to slight cloudy, high-viscosity, ethyl cyanoacrylate adhesive gel. This general purpose, gap-filling instant adhesive is suitable for bonding rubbers, plastics, and metals. It exhibits excellent peel strength and added-heat resistance. Fixture time occurs in seconds, with full cure achieved in 24 hr at normal room humidity.

LOCTITE® 4011 is a low viscosity, ethyl-based instant adhesive for the assembly of difficult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. This ISO 10993 certified product is well suited to porous or absorbent materials such as wood, paper, leather and fabric, although it can also bond plastics, rubbers and metals.

LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. Suited for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. Suited for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

LOCTITE® 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. Used for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

LOCTITE® 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239. It has a fixture time of 20 - 40 secs.

LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

Henkel Loctite Squeeze Bottle 475361, is a 20 g plastic container specifically designed for the precise dispensing of adhesives. This empty bottle comes in a pack of 10, making it a practical choice for various adhesive applications.

LOCTITE® Static Mix Nozzles for 50 ml A-System Dual Cartridges make light work of mixing 2-part components to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

LOCTITE® high performance static mix nozzles for 10, 12 and 50 ml cartridges (B & S-System) make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® 567 is a white, 1-part thread sealant designed for the locking and sealing of tapered metal pipe threads and fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Its high lubricating properties prevent galling on stainless steel, aluminum and all other metal pipe threads, and allows ease of disassembly. The product offers high temperature performance and oil tolerance. And it tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.

LOCTITE® 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners.

LOCTITE® 263 is a red, high-strength, primerless threadlocker for permanently locking and sealing bolts, nuts and studs to prevent loosening due to vibration. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces without the use of primer. Suitable for use on most oil-coated, “as-received” fasteners without cleaning.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.